XB-24超平地坪系统  Super flat floor system

产品介绍  Product introduction

激光找平混凝土地板也被称为平坦的地板，是目前世界上高水平，高标准的地板施工技术，它是为了提高地面的平整度，耐磨程度和延长使用寿命的地面和设计，特别是在物流仓储发挥巨大的优势在地面上，它保证叉车高稳定的正常使用而不是抵消,减少叉车的维修率，大大提高了工作效率。

Laser leveling concrete floor is also called super flat floors, is currently the highest level in the world and the highest standards of floor construction technology, it is in order to improve the flatness of the ground, wear-resisting degree and prolong the service life of the ground and design; Especially in logistics warehousing play a huge advantage on the ground, it guarantees the normal use of forklift truck high stability and not offset, reduce the maintenance rate of forklift, greatly improving the work efficiency.

★适用范围  Scope of application

大型商场、购物超市、物流仓储、货物配送中心、汽车制造车间、飞机制造及维修车间、展览会馆、港口码头及所有高要求的地面工程。

Shopping malls, shopping supermarkets, logistics, warehousing, cargo distribution center, automobile manufacturing, aircraft manufacturing and repair shop, exhibition hall, port terminals, and all the high requirements of ground engineering.

★性能特点  The performance characteristics of

1、施工时节省人工、降低工作强度，成品后减小地面开裂几率；

2、地坪表面更密实，超平亮洁、均等摩擦；

3、耐磨耐压性高，易保洁、清洁；

4、叉车等运行平稳、速度快、效率高且不会碰撞货架及倾倒，使用寿命长；

5、施工效率高（作业工效提高100-300%），更具竞争力。

1, save manpower, reduce the work intensity, during the construction of the finished product after reducing ground cracking risk;

2, floor surface is more dense, smooth bright clean, equal friction;

3, wear-resistant high pressure resistance, easy cleaning, clean;

4, forklifts and other smooth operation, high speed, high efficiency without collision shelves and dumping, long service life.

5, high construction efficiency, increase work efficiency of 100-300%) and more competitive.

超平地坪类型  Super flat floor type

1、混凝土地基地坪：适用于压力超过10吨/m2的地坪；

2、钢纤维混凝土地坪：可以减少地坪厚度，控制混凝土裂缝；

3、高强度混凝土地坪：使用30MPa，承重力可达到300kg/cm2，地表面不用其他材料处理，混凝土直接加工成地坪表面；

4、通道区域地坪：用于叉车作业高度超过12米的通道及经常通行的仓库地坪等。

1, concrete foundation floor: applicable to pressure for more than 10 tons/m2 floor;

2, steel fiber reinforced concrete floor, can reduce the thickness of the floor, to control concrete cracks;

3, high strength concrete floor: use 30 mpa, bearing capacity can reach 300 kg/cm2, the surface without other materials processing, concrete directly processed into ground surface;

4, the channel area floor: channel for forklift work more than 12 meters high and often pass the warehouse floor, etc.

★施工工序  Construction process

1、设定铺筑区域；

2、测试地坪水平；

3、完成浇筑工作；

4、保养及养护作业；

5、打磨及抛光作业；

6、自动测试仪测地坪。

1, set shop area;

2, test floor level;

3, casting work done;

4, maintenance and maintenance work;

5, grinding and polishing operation;

6, automatic tester measuring ground level ground.

技术指标  Technical indicators